NANROBOT Electric Scooter Speed Controller(Center Display)
Modification is not supported, purchase based on the original controller volts.
D4+MAX: Orders after November 1st start with serial number ZNRD4+MAXCEI0001, using NFC display.
N6 72V-QR is the quick-release motor version.
- Original controller
- Sine wave controller
I have had my scooter for 15 days put on 155 miles if I ride it in single mode that motor cuts out nothing different is on the screen spending 1700 after shipping I looked at the back motor and the threads are all on one side the nut on the left side is barely on i even went through Walmart website someone help me
Parfait ! Malgré 1 mois d’attente
After the year is almost here, this scooter is a success. The handling and replacement of its parts and excellent technical support are very happy.
really happy with the very good assistance and support
Funcional good
Funcional perfecto
Everything seems to work perfectly.
Thank you very much for your support.
Controller was the exact same as original including wire colours/combination
I was thrilled with the exceptional customer service! My controller arrived in no time thanks to their dedicated assistance. They guided me through the entire process with a smile. Nanrobot is the best.
Fjdjd
I was told it would take about 20 days to get the part delivered to me. It took about 50 days.
Perfect match to the existent component. Shipping took a little long but I was happy over all. It return my scooter back to full power.
Great communication and service, very happy
Going through NanRobot directly is so much better than road runner scooters. This is my 3rd repair on my scooter that has less than 600 miles. In my opinion the charge ports were the source of ruining both my controllers. It is a great scooter when it runs right. The scooter used very crappy charge ports and one literally exploded when I plugged it in. After that my scooter didn't run right, it didn't take long before i couldn't ride it. I replaced he rear controller and it was barely rideable, then it started surging so I replaced the front controller. Lesson learned...? Replace both controllers if your charge ports short out!
Tnx for your help. My scooter its worka again.
Es el mismo producto al original y me trabajo super bien ...
The spare part is working fine. But please avoid shipping with Fedex.
Fine
Used NANROBOT multiple times. Great support and fast shipment as always when I bought this controller👍
Arrived on time, faster than other affiliated stores. 😳👌
Excellent product and great costumer service! Fast shipping.
Well I contacted the support department and they were accurate with the mile function on my nanrobot D5+2.0 So I bought the controller and it got here very fast Considering it's coming from China Very happy with the factory part and FAST DELIVERY 👍
Hello! I believe I need to replace my D4+2.0 controller. Can I send a picture of my current controller so you can help me order the correct one?
Hello, you can send controller photos to support@nanrobot.com. We will help you determine which controller you need to order.
how do you release the speed setting?
Set P8 to 100 through the display
Can buying these and installing them increase the speed if you bought a scooter with the speed limited?
Hello, the controller can only be used on NANROBOT scooters, we do not guarantee that it can be used on other scooters. In addition, the speed limit of the NANROBOT scooter is limited by setting, and the speed limit can be released by setting at any time.
Is the controller a sine wave ?
Yes, all of our controllers are sine waves
Are the front and rear SPEED CONTROLLERS sold as 2in 1 or separate?
They are sold separately, if your original controller was a 2-in-1 controller, please select the 2-in-1 controller option